Description
Superior 17515 Flaring tool set Description:Flares 3/16″ to 5/8″ copper tubingLarge wing nut for easy opening Self centering yoke with ball bearing coneLong bar for gripping in viseCapacity:3/16″,1/4″,5/16″,3/8″,7/16″,1/2″ and 5/8″ soft aluminum and copper tubing. Instruction for use:1. Loosen 2 wing nuts on flaring tool bar and separate bars. 2. Insert tube into proper size hole and close flaring bars. Do not tighten wing nuts securely until tubing end is even with top surface of flaring tool bar. Then tighten wing nuts. Note: oversize or undersized flares can be made by locating the tube end above or below top surface of flaring tool bar. 3. Slip yoke onto flaring tool bar and then then position over end of tube. 4. Turn yoke handle to flare tube end. A flare is complete when yoke handle cannot be turned anymore. 5. Loose yoke handle. Remove yoke from bars and loosen both wing nuts before attempting to remove tubing. Made in USA Sup17515
